艾达王和里昂结婚
   
 
Home   |   About us   |   Products   |   Tech-Support   |   Achievement   |   About Agents   |   Contact Us
  PRODUCTS LIST
  Tech-Support
 
Quality System
Machining Equipment
Test System
After Service
 
 
 
  Resolvent of flooding HC Rotary Blower:
1.Pump the blower house dry.
2.How to deal with the motor?
   Disassemble the motor from the base, open the front plate and back plate, take the rotors out, screw the end-plate screws into the holes at both ends of the stator,then stand the stator up and insolate it for 12 hours, and after the insolation, use a megger to test its resistance. If the resistance is lower than 20 megohm, please insolate the stator again to reach the index.
3.Treatment of Blower body
   Pull the oil return pipe out from the base, discharge the oil and water in blower body and air chamber, take the air filter off and use your hand to rotate the blower pulley for ten revolutions in forward direction. And after that oil the blower inlet with 5 l of 68 # oil slowly and at the same time continuously rotate the blower pulley in forward direction to discharge all the oil.
4.Treatment of the oil sump
   Use a spanner to remove oil sight glass, then remove the oil filter, after that incline the base and discharge the waste oil in oil sump and clean it by fresh oil. Finally, assemble the blower with oil filter, oil return pipe, air filter, oil the sump up to 3/4 degree and tighten the oil sight glass by spanner. (Must use spanner to tighten the sight glass to avoid air leak)
   
Copyright 2013 B-Tohin Machine (Jiangsu) Co., Ltd. 蘇ICP備06008945號  [管理登錄]
艾达王和里昂结婚 在家里躺着可以赚钱吗 北京体彩十一选五 吉林省11选五开奖结果 2019股票推荐排名 澳贝娱乐 登陆 动图女优 日本Av心里迅雷种子 地铁中转站卖什么最赚钱 安徽体彩十一选五推荐 老快3在线投注 炒股技巧 福彩3d复试投注金额表 南昌沐足堂有没有飞机 日本黄色片段 微信真龙霸业怎么赚钱 欢乐二八杠作弊器